Rover Sports Register Forum

The nominal dimensions of P3 tires are 17X5.5. That means that the tire width is 5.5 inches and the wheel diameter is (17 +5.5X2)= 28 inches. A 16 inches wheel with the same width (16X5.5) would have 27 inches diameter. For the correct diameter a wider tire is required: 16X6.0 - which is a very comm...

Unfortunately, the workshop manual gives only the springs dimensions out of the car, not in situ . However, you need to remember that the Rover p2 suspension is under-slang, and a rear bonnet slightly lower than the front one is as it should be.

Examine the Woolies catalog : http://www.woolies-trim.co.uk/. They had been very helpful to me.

Have a look at the following threads: http://wp.me/pXLKy-1wa http://wp.me/pXLKy-1vU http://wp.me/pXLKy-1Q1 http://wp.me/pXLKy-1PT

The following thread may help you: http://www.rover-forum.thersr.co.uk/vie ... rbox#p8909

Yes. Watch the following thread: http://www.rover-forum.thersr.co.uk/vie ... ator#p8597

Just remove the two screws, turn the switch to the right direction, and replace the screws.

If your 10 is a 1939 - 1947, you can view pictures of a sunroof restoration here: http://wp.me/pXLKy-yV , http://wp.me/pXLKy-IW and here: http://wp.me/pXLKy-1ry

You have got it - your description is correct. Sorry for the poor quality picture, this is the only one I have with the full length of the cable, on others only part of it is seen. On some cars I had found a flat braid, not a cable, braid like the one which had been used to suppress radio interferen...