Brakes

Post Reply
MarkK
Posts: 25
Joined: Sun Aug 23, 2015 10:43 pm

Brakes

Post by MarkK » Mon May 21, 2018 9:49 pm

I'm guessing that I'll find asbestos brake linings in the drums of my 10hp. It has been off the road for years.
I'm sure modern brake linings are of some other material but now should I put a mask on when taking my brakes apart?
Mark

GOY189
Posts: 557
Joined: Sun Oct 19, 2008 5:08 pm

Re: Brakes

Post by GOY189 » Thu May 24, 2018 11:27 am

That's good practice, you might also clean the drums, linings and back plates with a rag wetted with brake and clutch cleaner (available from Motor Factors).

Hope this helps

Mike

jp928
Posts: 68
Joined: Fri Aug 02, 2013 7:44 am

Re: Brakes

Post by jp928 » Sat Aug 18, 2018 7:36 am

With my P2 (16 4light) I found the brake linings required some regular abrasion with emery paper or similar to remove glazing, to keep them effective, so wear a mask for that too. Dont apply compressed air either!
jp 26 Rover 9, previously P2,P3,P4,P6,P6B,RR, Discos

Post Reply