Page 1 of 1

P2 footwell vents

Posted: Fri Jan 10, 2020 4:14 pm
by RobHomewood
I am about to have the footwell vents reinstated on my '39 14 DHC. They were previously removed/sealed over decades ago and I think this may have been becasue there was some corrosiion where water was getting in. Would there have been a rubber seal on the outer flap originally? If so anyone know the profile?
If not, I plan to fit something anyway (it should be invisible) so any other suggestions welcome
Rob

Re: P2 footwell vents

Posted: Tue Jan 14, 2020 2:52 pm
by luli
I had got the rubber seals and a new set of springs from Mike Couldry. For details see here https://wp.me/pXLKy-1l8 and here https://wp.me/pXLKy-pR

Re: P2 footwell vents

Posted: Wed Jan 15, 2020 9:50 am
by RobHomewood
Many thanks for that Luli. I got the springs from Mike Couldry but should have asked him about the gasket too
Rob