Regulator Fuse

Post Reply
partviking
Posts: 32
Joined: Fri Oct 10, 2008 11:53 am

Regulator Fuse

Post by partviking » Sun Oct 18, 2020 5:01 pm

20201018_170056.png
20201018_170056.png (215.51 KiB) Viewed 2577 times
Can anyone tell me the ratings of the two fuses in the regulator on a 1940 12hp as per the picture. I currently have a 13 amp 240v plug fuse in the bottom and a blown 35 amp with a piece of wire soldered across the ends at the top. Cannot find any info in the workshop manual or wiring diagram.

GOY189
Posts: 557
Joined: Sun Oct 19, 2008 5:08 pm

Re: Regulator Fuse

Post by GOY189 » Tue Oct 20, 2020 12:36 am

According to the Lucas wiring diagram that I have seen, the fuses should be 25 amp.

Mike

partviking
Posts: 32
Joined: Fri Oct 10, 2008 11:53 am

Re: Regulator Fuse

Post by partviking » Tue Oct 20, 2020 6:48 am

Thanks Mike

Post Reply