Page 1 of 1

1939 P2 Engine Number

Posted: Wed Aug 02, 2023 3:21 pm
by Kitty
Hello Gary first post.
Where is the engine number? I thought it was on the engine mount leg on the right hand side, looking forward.
I need to locate for DVLA.
Logbook gives it a different number to the chassis number.
1939 P2 saloon.

Re: 1939 P2 Engine Number

Posted: Sat Aug 05, 2023 5:26 pm
by luli
It is exactly there. May be covered by paint or dirt, so remove it.

Re: 1939 P2 Engine Number

Posted: Sun Aug 06, 2023 8:45 am
by GOY189
Is there a brass plate screwed to the nearside of the engine near the dipstick? If so, that usually means the engine has been reconditioned by the Rover Co.
Mike Maher

Re: 1939 P2 Engine Number

Posted: Wed Aug 16, 2023 3:59 pm
by Kitty
Thanks for the replys.

The attached shows the engine mount.
Engine mount leg.JPG
Engine mount leg.JPG (41.88 KiB) Viewed 19426 times
I have a letter stating the engine was rebuilt by a local engineer as instructed by Rover!

Thanks again.

Re: 1939 P2 Engine Number

Posted: Sun Aug 20, 2023 5:52 pm
by HAD501
Hello

The engine in my car (1947) has no number either. There is a small engine-number plate mounted with the chassis number plate which states the engine number the same as the chassis number. However the V5 gives a different number for the engine. I've no idea how many times the engine may have been changed during the car's life. I vaguely remember reading somewhere (Freewheel, perhaps) that Rover engines weren't always numbered, which might explain the small extra plate. Having said that I do have a couple of spare blocks which are numbered in the expected place - so there we are!

All the best, DaveM