Just had an email from Dean Wilford who lives in Renmark South Australia, he writes :-
Hi , I own a 1949 P3 75 Rover Sedan, and am currently looking at having a new set of rings installed. Is it possible to get a parts list of parts required for this job. Also a price list for the cost of the parts.
Regards Dean
Can anyone relatively local to Dean suggest local suppliers. The Hepolite book suggests ring sets 8092/V (regular) or 8095/V (oilmaster)
Regards
Mike
Rover P3 75 Spares needed in Australia
Re: Rover P3 75 Spares needed in Australia
mike jim withers at j w classic parts in melbourne may be able to help as i have purchased wheel bearings and seals and other parts for my p3 from him in the past .ph 03 97626025.hoping this is of some help.regards Derrick.Smith
-
- Posts: 72
- Joined: Sat Feb 19, 2011 2:15 am
- Location: Murrumbateman, NSW, Australia
Re: Rover P3 75 Spares needed in Australia
Hi,
Earlier this year I was in contact with parts suppliers in the UK regarding the parts I needed to rebuild my P3 engine. They advised that when it came to pistons & rings I was best to contact JP Pistons in Australia!! JP are in South Australia so may be very close for your friend.
Good Luck Neil Henderson
Earlier this year I was in contact with parts suppliers in the UK regarding the parts I needed to rebuild my P3 engine. They advised that when it came to pistons & rings I was best to contact JP Pistons in Australia!! JP are in South Australia so may be very close for your friend.
Good Luck Neil Henderson
Re: Rover P3 75 Spares needed in Australia
Hi Neil
I need some new ball joints for my P3, and will need other parts in the future. Who do you use for parts, in Australia and in Britain?
Cheers
Nick (from Bungendore)
I need some new ball joints for my P3, and will need other parts in the future. Who do you use for parts, in Australia and in Britain?
Cheers
Nick (from Bungendore)