Page 1 of 1

is this a genuine Rover P3 or a chop job ?

Posted: Mon Aug 13, 2018 11:03 am
by kartik

Re: is this a genuine Rover P3 or a chop job ?

Posted: Tue Aug 14, 2018 8:27 am
by GOY189
Hi Kartik,

It is not a P3 as it has leaf springs and a beam axle, so it is a P2. To be sure we would need the chassis number that is normally stamped into the chassis near the steering box or on the brass plate on the bulkhead. My guess is that it started as a 10hp Saloon that has been "chopped".
Regards

Mike

Re: is this a genuine Rover P3 or a chop job ?

Posted: Tue Aug 14, 2018 9:56 am
by kartik
Mike, thank you for info.
regards
Kartik