new to forum - removing front seat

Post Reply
neil.henderson
Posts: 72
Joined: Sat Feb 19, 2011 2:15 am
Location: Murrumbateman, NSW, Australia

new to forum - removing front seat

Post by neil.henderson » Sat Feb 19, 2011 2:24 am

Hi, I am new to this forum. I bought an 1948 Rover P3 in late November 2010 and have been disassembling her (Dorothy is her name!) since then - when I have time..............
I have removed all the wings,back seats, the doors, lights, running boards and windows. Now I need to get the front seats out. But if I slide them fully forward the middle track hits a stop, if I slide them fully back the outer slides hit stops. Are there bolts that have to be undone & how do you get access to them please?
Bit stuck at the moment so any heklp gratefully received :-)

Thanks Neil Henderson, Murrumbateman NSW Australia
Top
keninnsw
Posts: 5
Joined: Sun Feb 13, 2011 1:04 am

Re: new to forum - removing front seat

Post by keninnsw » Thu Jun 02, 2011 1:33 am

Hi Neil,
You maya have already solved this but just in case you haven't.
I removed my seats by undoing a stop bolt in the rear of the two main tracks and slid the seats backwards.

Regards,


ken
Top
Post Reply

Return to “Early post WWII, P3 the original Rover 75 and 60”