Page 1 of 1

Late mk2 seat wiring diagrams

Posted: Thu Sep 24, 2009 1:21 pm
by richard moss
Image

Image

Image

Image

Image

If you're fitting electric seats to a car which had manual ones, connecting up the three wires shown in diagram 3 will give all seat adjustment functions. You'll need to study the diagrams to work out which wires need to be connected to a switch if you want the heaters to work - although I think it's just a case of connecting the green wire and orange/green wires (see pic 4).

The good news is that all the required relays etc are contained on the seats in post 1996 models - the only "remote" components are the seat heater switches.

Photobucket links for better pics:

http://i179.photobucket.com/albums/w293 ... seats1.jpg" target="_blank

http://i179.photobucket.com/albums/w293 ... seats2.jpg" target="_blank

http://i179.photobucket.com/albums/w293 ... seats3.jpg" target="_blank

http://i179.photobucket.com/albums/w293 ... seats4.jpg" target="_blank

http://i179.photobucket.com/albums/w293 ... seats5.jpg" target="_blank

Re: Late mk2 seat wiring diagrams

Posted: Sat Oct 30, 2021 1:21 pm
by andyrover
Richard Ive tried downloading and printing the wiring diagrams but they do not print clearly enough to be read. Ive tried both photobucket versions too. I would really appreciate if you have these in a clearer format

Regards

Iain

Re: Late mk2 seat wiring diagrams

Posted: Sat Oct 30, 2021 2:25 pm
by 47p2
andyrover, I don't think Richard has been on the forum for a while.

You might be best joining http://rover800.info/forum/ and the guys there should be able to assist you