Rover Sports Register Forum

Would any member have a photo of a fuel pump cover so as i can get some idea what it looks like to make one.regards Derrick.Smith

Hi Derrick SU Fuel Pump Caps are still available from the following Company here in the UK: Burlen Ltd
Here is a link to the page for the caps and terminal knob Your pump should be an AUA 25 or AUA 66
http://sucarb.co.uk/su-fuel-pumps-spares/pump-caps.html

Burlen Ltd
Spitfire House
Castle Road
Salisbury
Wiltshire
SP1 3SB

http://sucarb.co.uk/

Thanks chris for your reply,i did not explain myself very clearly. what i am looking for is a more detailed photo of the cover that goes over the complete pump as shown as item no 37 in the rover p3 work shop manual in( section electrical j9 ) compiled by the rover sports register.regards Derrick.Smith

Have a look at the following threads: http://wp.me/pXLKy-1wa http://wp.me/pXLKy-1vU http://wp.me/pXLKy-1Q1 http://wp.me/pXLKy-1PT

Thanks luli we would be b------d with out your knowledge, may be the rsr should pay you a retainer. thanks again regards Derrick.Smith.

Hi Derrick,

The generic picture in the workshop manual shows the exploded diagram for the SU pump. The cover shown is not a P3 part.

Hope this helps

Mike

Thanks mike i can now set about making one to try and keep a bit of heat of the pump regards Derrick.Smith