is this a genuine Rover P3 or a chop job ?

Post Reply
kartik
Posts: 103
Joined: Wed Nov 30, 2011 4:18 pm
Location: Jaipur, India

is this a genuine Rover P3 or a chop job ?

Post by kartik » Mon Aug 13, 2018 11:03 am


GOY189
Posts: 556
Joined: Sun Oct 19, 2008 5:08 pm

Re: is this a genuine Rover P3 or a chop job ?

Post by GOY189 » Tue Aug 14, 2018 8:27 am

Hi Kartik,

It is not a P3 as it has leaf springs and a beam axle, so it is a P2. To be sure we would need the chassis number that is normally stamped into the chassis near the steering box or on the brass plate on the bulkhead. My guess is that it started as a 10hp Saloon that has been "chopped".
Regards

Mike

kartik
Posts: 103
Joined: Wed Nov 30, 2011 4:18 pm
Location: Jaipur, India

Re: is this a genuine Rover P3 or a chop job ?

Post by kartik » Tue Aug 14, 2018 9:56 am

Mike, thank you for info.
regards
Kartik

Post Reply