Good Evening,
Here's a technical question. What is the thread in the sump to take the oil filter? I believe it is 1 3/4" x 16TPI and is an 'old' Copper Tube Thread form?
Regards
Richard
Sump oil filter thread type
-
- Posts: 15
- Joined: Sat May 02, 2009 10:18 pm
Re: Sump oil filter thread type
Hi Richard
Whats the Part No. for the oil filter you are interested in?
I have a P2 filter in front of me.
Thread 1and11/16" o.d. [exactly: 1.682" o.d. on male thread]
16 tpi
55 deg. thread angle [ie imperial thread]
Rod Scarman
Whats the Part No. for the oil filter you are interested in?
I have a P2 filter in front of me.
Thread 1and11/16" o.d. [exactly: 1.682" o.d. on male thread]
16 tpi
55 deg. thread angle [ie imperial thread]
Rod Scarman
Re: Sump oil filter thread type
Rod,
It's part no. 09071. Somebody else has told me its 1.75" x 16TPI which makes it either:-
1. American ANFF
2. American SAE Extra Fine
3. ISO 16UN
As far as I can determine I just wondered if anybody had a definitive answer as I thought somebody must have tried to recover the thread at some time?
Regards
Richard
It's part no. 09071. Somebody else has told me its 1.75" x 16TPI which makes it either:-
1. American ANFF
2. American SAE Extra Fine
3. ISO 16UN
As far as I can determine I just wondered if anybody had a definitive answer as I thought somebody must have tried to recover the thread at some time?
Regards
Richard
-
- Posts: 15
- Joined: Sat May 02, 2009 10:18 pm
Re: Sump oil filter thread type
Richard
In my earlier email, I wrongly assumed you were talking about a P2 oil filter.
As the part number you've given is different, my earlier information probably becomes irrelevant.
Along with you, I'm interested the comments of other members.
pm sent.
Rod Scarman
In my earlier email, I wrongly assumed you were talking about a P2 oil filter.
As the part number you've given is different, my earlier information probably becomes irrelevant.
Along with you, I'm interested the comments of other members.
pm sent.
Rod Scarman