Removing a bootlid handle

Post Reply
MaxPegler
Posts: 9
Joined: Tue Jul 31, 2018 11:47 pm

Removing a bootlid handle

Post by MaxPegler » Tue Sep 04, 2018 8:18 am

Evening all,

My newly acquired P3 is missing the mechanism behind the handle, drivers side.

The wrecker here near Sydney has been unable to remove same from his spares car. His question is:

Is there is a bolt securing the latch assembly to the square shaft/ handle?

Thanks in advance
Max P

User avatar
luli
Posts: 646
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: Removing a bootlid handle

Post by luli » Tue Sep 04, 2018 10:55 pm

There is no bolt. you need to file the sharp chisel blowes that hold the cap. See here https://lulisml.wordpress.com/2011/11/2 ... %9E%D7%A8/ and also here https://lulisml.wordpress.com/2012/12/2 ... %99%D7%A2/
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

MaxPegler
Posts: 9
Joined: Tue Jul 31, 2018 11:47 pm

Re: Removing a bootlid handle

Post by MaxPegler » Wed Sep 05, 2018 10:53 pm

Thks!

Post Reply