Hi. New member.
I have a '37 rover ten that has had the rear inner wings repaired badly and I am trying to rebuild it properly.
I assume that the rear wings should have the piping between the wings and the body but are the outer wings bolted to the inner wings or are the outer wings, inner wings and rear apron 1 piece that then bolt to the body.
Any help appreciated.
Vince
rover ten
Re: rover ten
The outer wings are separate from the inner wings.
Might be worth trying to get hold of a parts catalogue as they have diagrams that will help you with your car
Might be worth trying to get hold of a parts catalogue as they have diagrams that will help you with your car
Re: rover ten
Thanks for that. Had thought of a parts catalogue but they seem to be very expensive. Is there anywhere I can get one at a reasonable price? Or even someone with a car I could come and look at.
Thanks again.
Thanks again.
Re: rover ten
Hi Vince.
Where in the country are you ?
cheers Jeff. Lee.
Where in the country are you ?
cheers Jeff. Lee.
1937-20 SS _ 1938-20 SS _ 1946-16 SS _ 1947-16 saloon
Re: rover ten
Hi. I'm in the north of Scotland but will be coming south in about 3 weeks and will be visiting friends near Rotherham, Sheffield and Burton on trent. Will then be going to the lakes before heading home. So if I could come and look at one - that'd be great.
Re: rover ten
Hi Vince,
Give me a ring and you can see my cars.
cheers Jeff.
Give me a ring and you can see my cars.
cheers Jeff.
1937-20 SS _ 1938-20 SS _ 1946-16 SS _ 1947-16 saloon