Sills,step brackets

Post Reply
MarkK
Posts: 25
Joined: Sun Aug 23, 2015 10:43 pm

Sills,step brackets

Post by MarkK » Sun Jul 02, 2017 7:44 pm

Planning to fit new sills to my 1947 10hp very soon. I think I've got everything. One query - the parts book says the step bracket to chassis bolts should be 5/16 x 7/8. I couldn't find that size exactly. Can anyone tell me if 5/16 x 1in would be close enough, or too big? I could always grind 1/8in if needs be off each but if 1in. will do happy days.

User avatar
Phil - Nottingham
Posts: 357
Joined: Thu Oct 09, 2008 10:45 am
Location: Nottingham

Re: Sills,step brackets

Post by Phil - Nottingham » Thu Jul 13, 2017 10:54 pm

Over long bolts/screws can just take longer to remove when rusty - they should not foul anything so I would try them
P2/P4/P5/P5B/LR's - EXJ 8**/2**8MY & others

Post Reply