P6B battery hold down dimensions please

P6B battery hold down dimensions please

Postby jp928 » Mon Jun 04, 2018 10:08 am

Can anybody provide these dimensions please? This is the one located on the right side of the boot, in the ledge. I remember this holdown as one of the best I have seen, as it goes all the way around the battery top, and is secured at the narrow ends -it will be very suitable for my 26 Rover 9/20, as long as it fits the battery I have (6v) - 170x225mm in plan.
thanks
John.
jp928
 
Posts: 67
Joined: Fri Aug 02, 2013 6:44 am

Re: P6B battery hold down dimensions please

Postby GOY189 » Mon Jun 18, 2018 9:21 am

One of the batteries recommended for the P6B is a similar width but over 40mm longer at 269L x 226H x 174W
Hope this helps
Mike
GOY189
 
Posts: 345
Joined: Sun Oct 19, 2008 4:08 pm

Re: P6B battery hold down dimensions please

Postby jp928 » Thu Jun 21, 2018 6:24 am

The 174 wide would fit OK, but the other sides rule it out.
thanks
jp 26 Rover 9
jp928
 
Posts: 67
Joined: Fri Aug 02, 2013 6:44 am


Return to P6, rover 2000s and 3500s

Who is online

Users browsing this forum: No registered users and 0 guests

cron