Sump oil filter thread type

Sump oil filter thread type

Postby lanmog » Tue Aug 28, 2018 10:49 pm

Good Evening,

Here's a technical question. What is the thread in the sump to take the oil filter? I believe it is 1 3/4" x 16TPI and is an 'old' Copper Tube Thread form?

Regards

Richard
lanmog
 
Posts: 7
Joined: Sun Aug 26, 2012 5:01 pm

Re: Sump oil filter thread type

Postby RodScarman » Wed Aug 29, 2018 3:49 pm

Hi Richard
Whats the Part No. for the oil filter you are interested in?
I have a P2 filter in front of me.
Thread 1and11/16" o.d. [exactly: 1.682" o.d. on male thread]
16 tpi
55 deg. thread angle [ie imperial thread]
Rod Scarman
RodScarman
 
Posts: 15
Joined: Sat May 02, 2009 9:18 pm

Re: Sump oil filter thread type

Postby lanmog » Fri Aug 31, 2018 5:28 am

Rod,

It's part no. 09071. Somebody else has told me its 1.75" x 16TPI which makes it either:-

1. American ANFF
2. American SAE Extra Fine
3. ISO 16UN

As far as I can determine I just wondered if anybody had a definitive answer as I thought somebody must have tried to recover the thread at some time?

Regards

Richard
lanmog
 
Posts: 7
Joined: Sun Aug 26, 2012 5:01 pm

Re: Sump oil filter thread type

Postby RodScarman » Fri Aug 31, 2018 4:20 pm

Richard
In my earlier email, I wrongly assumed you were talking about a P2 oil filter.
As the part number you've given is different, my earlier information probably becomes irrelevant.
Along with you, I'm interested the comments of other members.
pm sent.
Rod Scarman
RodScarman
 
Posts: 15
Joined: Sat May 02, 2009 9:18 pm


Return to Early post WWII, P3 the original Rover 75 and 60

Who is online

Users browsing this forum: No registered users and 0 guests