Accelerator linkage

Post Reply
mbishton
Posts: 20
Joined: Sat Jun 29, 2019 7:40 pm

Accelerator linkage

Post by mbishton » Sat Jun 29, 2019 7:45 pm

Dear all,

New member alert!!

I have a 1935 Rover 14 that I am currently piecing back together from boxes of bits.

I have found the throttle pedal, linkage etc but have little idea where/how these mount and how they connect to the carburettor (cable? rod?)

Also, how the two "mixture" and "throttle" manual dashboard cables also connect to the carb, so if anyone has any pics of their set up or any information, I would be eternally grateful for any help given!!

Thank you in anticipation!

Regards,
Matt

Vince
Posts: 46
Joined: Thu Sep 11, 2014 8:46 pm
Location: north Scotland. Thurso

Re: Accelerator linkage

Post by Vince » Sun Jun 30, 2019 9:25 am

Hi, I find it easier to post photos to the Facebook page so you might want to ask on there too.
I have tried to post photos on this forum and couldn't manage it for some reason.


I have a 37 10 and a 47 14 but would imagine that the linkage is similar.

https://www.facebook.com/groups/760185630722124/

Or

https://www.facebook.com/groups/rsrcommunity/

User avatar
luli
Posts: 378
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: Accelerator linkage

Post by luli » Sun Jun 30, 2019 9:52 pm

Here are some:
Image

Image

Image

Image
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

mbishton
Posts: 20
Joined: Sat Jun 29, 2019 7:40 pm

Re: Accelerator linkage

Post by mbishton » Mon Jul 01, 2019 9:32 am

Thanks so much, that's really really helpful - much appreciated!!

mbishton
Posts: 20
Joined: Sat Jun 29, 2019 7:40 pm

Re: Accelerator linkage

Post by mbishton » Mon Jul 01, 2019 9:34 am

Vince wrote:Hi, I find it easier to post photos to the Facebook page so you might want to ask on there too.
I have tried to post photos on this forum and couldn't manage it for some reason.


I have a 37 10 and a 47 14 but would imagine that the linkage is similar.

https://www.facebook.com/groups/760185630722124/

Or

https://www.facebook.com/groups/rsrcommunity/
Thanks Vince, I have requested to join both groups - really appreciate the help!

Vince
Posts: 46
Joined: Thu Sep 11, 2014 8:46 pm
Location: north Scotland. Thurso

Re: Accelerator linkage

Post by Vince » Mon Jul 01, 2019 10:34 am

No problem.

Post Reply