P2 footwell vents

Post Reply
RobHomewood
Posts: 172
Joined: Tue Oct 22, 2013 8:04 pm

P2 footwell vents

Post by RobHomewood » Fri Jan 10, 2020 5:14 pm

I am about to have the footwell vents reinstated on my '39 14 DHC. They were previously removed/sealed over decades ago and I think this may have been becasue there was some corrosiion where water was getting in. Would there have been a rubber seal on the outer flap originally? If so anyone know the profile?
If not, I plan to fit something anyway (it should be invisible) so any other suggestions welcome
Rob

User avatar
luli
Posts: 402
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: P2 footwell vents

Post by luli » Tue Jan 14, 2020 3:52 pm

I had got the rubber seals and a new set of springs from Mike Couldry. For details see here https://wp.me/pXLKy-1l8 and here https://wp.me/pXLKy-pR
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

RobHomewood
Posts: 172
Joined: Tue Oct 22, 2013 8:04 pm

Re: P2 footwell vents

Post by RobHomewood » Wed Jan 15, 2020 10:50 am

Many thanks for that Luli. I got the springs from Mike Couldry but should have asked him about the gasket too
Rob

Post Reply