Front wing/running board beading

Post Reply
David2021
Posts: 80
Joined: Sun Jan 31, 2021 5:29 pm
Location: Stratford upon Avon

Front wing/running board beading

Post by David2021 » Tue Oct 12, 2021 3:22 pm

My 1947 tourer has no plated trim strip along the vertical face of the bottom of the front wings & the "step board valence" Looking at the parts list there is nothing shown as "replacing" or "additional" so it looks as if the strip is the same as the 12 saloon(held on by two 2BA screws and 10spring clips)
The photos in Howard Jones' excellent book show some with & some without! Most look about 1/2" or 3/4" deep, but there are some with full depth strips or even one strip for the wing & one for the step board!
Any advice ? ideas?

David2021
Posts: 80
Joined: Sun Jan 31, 2021 5:29 pm
Location: Stratford upon Avon

Re: Front wing/running board beading

Post by David2021 » Thu Oct 14, 2021 11:22 am

Update!
Yes it should have them and they are available from Meteor! :)

User avatar
luli
Posts: 518
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: Front wing/running board beading

Post by luli » Mon Oct 18, 2021 7:57 am

See here a note about assembling : https://wp.me/pXLKy-3Sf
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

Post Reply