Help, how does my 14 dash come out?

[Arewethereyet]

Hi all, my ignition switch is spinning round and the solenoid wires adrift! I've removed the 4 nuts that appear to hold the instruments into the dash but the cluster is still being held. How do I get the cluster out without removing the whole dash!

[GOY189]

The ignition switch is held in by a wire clip that is fastened with a small nut and bolt. Loosen the bolt, slide the clip backj and you should be able to pull the ignition switch out without removing the dash

hope that this helps

Regards

Mike

[Arewethereyet]

Many thanks Mike, that's it sorted.