Wiper spindle rubbers
Wiper spindle rubbers
Hi, my '47 16 6 light doesn't have the rubber grommets/shrouds/seals fitted on the wiper arm spindles. I've got a pair of new rubbers to fit but don't know whether I have to remove the spindles and fit the rubbers and then re-fit the spindles from behind the dashboard, or fit them externally. Can anyone advise on this please? Thanks, Alan
Re: Wiper spindle rubbers
I'm not certain about P2 ones but on a P3 they can be fitted from the outside.
Re: Wiper spindle rubbers
I fitted mine on my P3 with out removing the spindle but the P2 could be differant, give it a go if not you can remove the spindles
- Phil - Nottingham
- Posts: 357
- Joined: Thu Oct 09, 2008 10:45 am
- Location: Nottingham
Re: Wiper spindle rubbers
P2 can be fitted from outside too - use a lubricant
P2/P4/P5/P5B/LR's - EXJ 8**/2**8MY & others
Re: Wiper spindle rubbers
Thanks for the replies folks, I'll have another look later this week.
Best wishes, Alan
Best wishes, Alan