Wiper spindle rubbers

[apkok]

Hi, my '47 16 6 light doesn't have the rubber grommets/shrouds/seals fitted on the wiper arm spindles. I've got a pair of new rubbers to fit but don't know whether I have to remove the spindles and fit the rubbers and then re-fit the spindles from behind the dashboard, or fit them externally. Can anyone advise on this please? Thanks, Alan

[lakesrally]

I'm not certain about P2 ones but on a P3 they can be fitted from the outside.

[P3Steve]

I fitted mine on my P3 with out removing the spindle but the P2 could be differant, give it a go if not you can remove the spindles

[Phil - Nottingham]

P2 can be fitted from outside too - use a lubricant

[apkok]

Thanks for the replies folks, I'll have another look later this week.

Best wishes, Alan