Rover Sports Register Forum

Posted: **Tue Mar 03, 2015 7:09 pm**

The chap rebuilding my 1939 14s head says he thinks they didn't valve stem seals fitted. Is he right?

Posted: **Tue Mar 03, 2015 7:42 pm**

Not sure but it would make sense to there are plenty of modern ones that are all rubber that could just be pushed or glued in place I did this to a 1955 Aerial motor cycle engine years ago.

Posted: **Tue Mar 03, 2015 7:48 pm**

wooster wrote:The chap rebuilding my 1939 14s head says he thinks they didn't valve stem seals fitted. Is he right?

Yes, he is right.
See pictures here http://wp.me/pXLKy-21C - the 6 cylinders engine is similiar.

Posted: **Wed Mar 04, 2015 7:51 am**

Thanks Gents

Rover Sports Register Forum

Valve stem seals?

Valve stem seals?

Re: Valve stem seals?

Re: Valve stem seals?

Re: Valve stem seals?