Page 1 of 1
Radiator Cap
Posted: Thu Mar 22, 2018 3:25 pm
by RumblinRon
The raised ridge on the radiator cap does not centre with the bonnet centre, it's not a straight line it's about 10 degrees out, ie at 11 o'clock.
This is very annoying! Is there a easy way to adjust this, or do I really have to move the radiator ?
Ron
Re: Radiator Cap
Posted: Sat Mar 24, 2018 5:17 pm
by Phil - Nottingham
The prongs on the cap are adjustable - it may be that the filler hole was not correctly aligned when the rad was reconned?
Re: Radiator Cap
Posted: Mon Mar 26, 2018 1:58 pm
by RumblinRon
It was like it when I bought the car, but after looking at it it looks harder to fix than I first assumed
. I shall have another look at the cap, I must admit I have not found how to adjust the cap yet, but nice to know you can, easier than adjusting the radiator mounting !
Cheers
Ron
Re: Radiator Cap
Posted: Mon Mar 26, 2018 10:02 pm
by Phil - Nottingham
There is not much adjustment though!
Re: Radiator Cap
Posted: Tue Mar 27, 2018 2:22 pm
by RumblinRon
Hi Phil
Is there a scew or something you can loosen? Cannot see whats holding the lugs to the cap.
Re: Radiator Cap
Posted: Tue Mar 27, 2018 8:09 pm
by Phil - Nottingham
Tiny BA nuts/studs on mine
Re: Radiator Cap
Posted: Sat Mar 31, 2018 10:43 am
by RumblinRon
Thanks for the help.
Ron