Rover P3 Radiator Dimensions

[kartik]

Hi,

My car did not come with a radiator but I have been able to source both the original top and bottom tanks.
Now I would be very grateful if some one could please give me the dimensions of the radiator,

Basically I need the height of the fins between the tanks, and a couple of pictures would help too.

thanks

Kartik

[kartik]

Someone please Help !!
Sadly there are only a couple of P3 survivors in India and none is close to me, so I need
all the help.

thanks
Kartik

[lakesrally]

Hi, As near as I can measure it with the radiator in the car it seems to be 45cm between the tanks. See below for photographs. Note the damage from the previous (P2) fan blades striking the back of the radiator when the gearbox securing rubbers had failed. Best of luck.

[kartik]

Thank you so much for the pictures and the measurement, this would help a lot.

regards
Kartik