Rover Sports Register Forum

Hi can anybody tell me the dimensions for the rear sunroof sheet metal please I have the RSR manual but cant find any dimensions any help appreciated

Mine is 1140 mm x 548mm,length measured over the curved section of Ash timber frame. There's a couple of 40mm wide strengtheners welded across width at 350 mm in from each end and a 50mm strip on the edge of the " Open " end for rigidity. Alan ( p3man451 ).

Sunroofs were built to fit individual cars. The first job on the production line was to fit and adjust the sunroof frames to fit the aperture. They were then stamped with the body number and the body number plate was fixed to the car so the trimmed sunroof would be fitted to the right car. The dimensions of a Sports Saloon sunroof are different to the saloon sunroof.

Mike

thank you both for your replies that's been a big help