Rover Sports Register Forum

1948 P3. Does anybody know where I could obtain a pair of Radiator Ties and a Heater Air Intake? Both run from the radiator back to the bulkhead please. Both removed by previous owner!

Is this the type of ties you require?
These are approx 37" in length with adjustment

The ties shown are most likely for a P2. One of the P3 ties (nearside if memory serves) has a bend to clear the air intake.

Suggest you measure the distance between the bulkhead and radiator fixing on both sides, one or both ties shown may fit, although one would have to be bent.

You could try Meteor spares or Mike Evans for the missing air intake.

Hope this helps

Mike

Hello Mike most grateful. how do I go about discussing their purchase please? I'm new to this.

To contact members direct; ie outside of the public forum here, click on their name (in your case ‘Eastendjohn’ ) and then select ‘send a private message’ to contact them by email. You can then agree purchase of parts etc.

Mike Couldry ( Meteor Spares) or Mike Evans (Viking Engineering) both advertise on the club pages and in the RSR Magazine, so their contact details are available there. In my experience, these guys have the widest selection of parts for sale for our cars and are both an absolute goldmine of information.

Hope that helps.

Very many thanks Tony

I've sent you a reply to your pm and email John

Deal done. Many thanks John

You're welcome