Hi,
My name is Trevor Appleby, I have been a RSR member for 12 years but this is my first attempt at using this forum.
I am restoring a 1948 P3 that I started in 1997! For various reasons it has been an on/off project but at last I am starting to reassemble rather than dis-assemble. My current problem is that after refitting the engine and gearbox I can't for the life of me see how to connect the freewheel cable to the freewheel assy. but then it was twelve years ago that I took it apart.
Can anyone help? pictures or a sketch would reach me at applebyt@hotmail.com
Many thanks, Trevor
Freewheel cable
Re: Freewheel cable
Hello Trevor,
If no one has yet supplied you with a picture please reply to this post and I will snap some pictures and provide some direction later today.
Let me know
Dirk
If no one has yet supplied you with a picture please reply to this post and I will snap some pictures and provide some direction later today.
Let me know
Dirk
Re: Freewheel cable
Hello Dirk,
Nobody has come back to me yet so, I would much appreciate it if you could supply me with a picture and some directions.
Many thanks,
Trevor
Nobody has come back to me yet so, I would much appreciate it if you could supply me with a picture and some directions.
Many thanks,
Trevor
Re: Freewheel cable
Hi Dirk,
I have sorted this out myself now, but thanks for offering.
Trevor
I have sorted this out myself now, but thanks for offering.
Trevor
Re: Freewheel cable
sorry I've only just come on the forum after about a month and read this, I did the clutch on my P3 last year so if you have any more questions in that area give me a shout