Rover Sports Register Forum

HI There

I am new to the Rover P2 and have a 1939 10 that is currently being re trimmed, I have noticed that there are remnants, or so it seems, of seals around the window frames to hold the glass tight in the door frame, Does anybody have any dimensions of these seals and the profile required ?

Thanks
Mike

Try Woolies or Paul Beck. This may help http://www.woolies-trim.co.uk/p-1023-wi ... annel.aspx

The chief difficulty is likely to be finding the pan head screws that hold the old channel in. Good luck

Regards

Mike

Mike, thanks very much for the prompt reply, I will measure the glass thickness and the window frame gap and see if I can make it fit, I will keep you posted

Thanks for the Help

Regards

Mike