Jacking points

Post Reply
Willem
Posts: 7
Joined: Wed Jun 30, 2021 11:32 am

Jacking points

Post by Willem » Tue Jul 20, 2021 1:42 pm

A good afternoon to you all, I am looking for a bit of information about the jacking points on the front suspension, I am in the process of oiling, greasing and recommissioning Mathilda and have found that the jacking points are loose on the suspension. Is that on purpose so the suspension leaves can move about freely or are they supposed to be tight?
Many thanks, Willem
Rover 12 Tourer, 1936
Range rover L322, 2009

David2021
Posts: 53
Joined: Sun Jan 31, 2021 5:29 pm
Location: Stratford upon Avon

Re: Jacking points

Post by David2021 » Wed Jul 21, 2021 8:24 pm

Not sure what these wobbly Jacking points are!? My car has jacking points accessed inside the car for the Rover Jack. If using a trolley jack I would fit the jack's pad under the axle as far out board as you can and lift away. Put an axle stand under the axle when at the working height, and remove the Trolley jack
Putting a trolley jack under the middle of the axle puts a bit of a bend (temporarily!) in the axle , but more important is not stable.

Willem
Posts: 7
Joined: Wed Jun 30, 2021 11:32 am

Re: Jacking points

Post by Willem » Wed Jul 21, 2021 10:29 pm

Thank you for your suggestion David, I am now sure they are as some engineer intended, I can't see how I can access the lifting points from inside the vehicle though. I'll just avoid flat tyres I think. :)
Rover 12 Tourer, 1936
Range rover L322, 2009

User avatar
luli
Posts: 495
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: Jacking points

Post by luli » Wed Jul 21, 2021 11:03 pm

page10.jpg
page10.jpg (51.97 KiB) Viewed 158 times
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

User avatar
luli
Posts: 495
Joined: Sat Jun 04, 2011 6:49 am
Contact:

Re: Jacking points

Post by luli » Wed Jul 21, 2021 11:27 pm

If using a trolley jack put it under the chassis. Be careful not to put it under the exhaust!
FW.jpg
FW.jpg (76.62 KiB) Viewed 158 times
Rover 10 1946 RHD
Rover 10 1947 LHD
Rover 12 1947 tourer LHD
http://lulisml.wordpress.com/

David2021
Posts: 53
Joined: Sun Jan 31, 2021 5:29 pm
Location: Stratford upon Avon

Re: Jacking points

Post by David2021 » Thu Jul 22, 2021 12:27 pm

That sounded like a "Don't ask me how I know " moment!!
Reminds me - I have to check my exhaust mountings..it looks like a made up system and can be improved I think!

Post Reply