Rear Window Blind Pulleys

chris dancey · Post by **chris dancey** » Sat Nov 09, 2013 10:10 am

Does anyone have a couple of spare rear window blind pulleys for my 1935 10hp saloon. They would be the same for many other models I am sure.

The pulley housing / saddle assembly measures 1cm x 1.5cm ( not including the securing screw which acts also as the pulley axle ). The pulley housing is in the shape of a saddle and the ones I have seen are chromed.

I would be interested in two if you have them.

Thanks

chris dancey · Post by **chris dancey** » Wed Nov 20, 2013 5:59 pm

As none were available from the usual sources I decided to make a couple. Thanks for looking.

luli · Post by **luli** » Thu Nov 21, 2013 9:07 am

Do you need photos/dimensions?

chris dancey · Post by **chris dancey** » Thu Nov 21, 2013 9:59 pm

Luli, Thanks for asking. I have a couple on my barn find 10hp ( Denzel ) which I have used as a pattern. I found some marine roller blind fittings that I have adapted, the result is very good, they are stainless so polish up nicely.

Rover Sports Register Forum

Rear Window Blind Pulleys

Rear Window Blind Pulleys

Re: Rear Window Blind Pulleys

Re: Rear Window Blind Pulleys

Re: Rear Window Blind Pulleys